POOL SERVICES
Let mark’s pool service take the worries out of opening your pool this year!

Mark’s Pool service above ground swimming pool opening special includes the following:

    1. Remove the cover from the pool
      • includes draining the water off the cover (if there are no holes in the cover)

If the water does not have to be drained there is a discount.

  • Remove any and all winter items such as the winter plug or gizmo and skimmer winter plate.
  • Install the filter equipment and hoses to the pool.
  • Install the pool ladder (either in pool or a-frame type)
    Walk-in steps are an additional price.
  • Provide and install the startup chemicals as follows:
    • 2.5 gallons of liquid chlorine (5 gallons are included in larger pools)
    • DE if the filter requires it.
    • Salt if required (there is an additional charge based on the amount required. This is determined by a water test.)
    • We will rinse off the filter grids or cartridges when required. Additional cleaning can be provided (chemical dip) for an additional charge.

 

Mark’s Pool Service in ground swimming pool opening cost includes:

  1. Remove the winter pool cover
    • Drain the water off (if required)
    • Drain and fold up the water bags (if required)
    • c. Rinse off winter cover and fold up and put where required
  1. Remove all winter items such as:
    • Winter plugs
    • Gizmo’s or skimmer bottles
  2. Install (UN-winterize) all pool equipment:
    • Pool returns (eyeball fittings)
    • Skimmer baskets
    • Pool pump plugs
      -if the motor has been removed, there is an additional charge of $50.00 to re-install it.
    • Automatic chlorinators (as required)
    • Heater plugs and required equipment
      -if the burner tray has been removed, there is an additional charge.
    • Filter grids packs or cartridges (as required)
    • In pool ladders or handrails (as required)
  3. Pool startup which includes the following:
    • Start the filter system (pool water level must be above the skimmers if not there is an additional charge )
    • Provide the start up chemicals
      -2.5 or 5g of liquid chlorine based on the pool size
      -De for the filter (as required)
    • If the customer wants the pool cleaned this is done three days after the pool has been opened and the chemicals have had a chance to work (vacuumed and leaf skimmed)based on the individual situation. Additional quotes can be provided at the opening.

Opening costs are based on the type of winter cover and options that are present on the pool:

16X35 Grecian in ground liner

16X32 Off set rectangle in ground

20X40 Freeform in ground liner replacement

16X32 Off Set Rectangle in ground liner

20 X 50 RECTANGLE RENOVATION BEFORE

20 X 50 RECTANGLE PEBBLE SHEEN WITH BLUE STONE COPING

STONE COPING, STONE STYLE TILE, AND GRAY PLASTER THIS IS THE FINISH RENOVATION WITH STONE COPING, STONE STYLE TILE AND CUSTOM GRAY PLASTER.

EMERALD GALAXY PEBBLE FINA AND NEW SOLID TILE EMERALD GALAXY PEBBLE FINA BY PEBBLE TEC WITH SOLID TILE

BLACK PEBBLE FINA WITH STONE COPING AND CUSTOM TILE BLACK PEBBLE FINA BY PEBBLE TEC WITH STONE COPING AND CUSTOM TILE

SOLID SAFETY COVER WITH STONE WATERFALL

SUPER MESH SAFTEY COVER WITH A RAISED STONE WALL GLI SUPER MESH SAFETY COVER WITH A RAISED STONE WALL INSTALLATION

MESH 16X32 GRECIAN SAFETY COVER 16X32 GRECIAN STYLE MESH SAFETY COVER

Mark’s Pool Service only uses the filter that’s designed for your swimming pool. Whether it is an above ground pool or an in-ground pool we can custom design a system that makes your swimming pool experience a pleasant one, not a chore that makes you hate your pool. Let Mark’s Pool Service save you from your inefficient swimming pool filter system.

HAYWARD 500 LB SAND FILTER

  • This is what can happen over time when the Skimmer Gaskets Leaks — Swimming Pools Service in Allentown, PA

RUSTED POOL SKIMMER REPAIR ABOVE GROUND RUSTED
POOL SKIMMER REPAIR.

STAINLESS STEEL SKIMMER PANEL THIS IS A 20 GAUGE STAINLESS STEEL SWIMMING POOL PANEL REPAIR DONE BY MARK’S POOL SERVICE

24FT FULL PRINT LINER A NEW 24FT FULL PRINT LINER INSTALLED AFTER THE SKIMMER REPAIR HAS BEEN DONE.

EXTRUDED ALUMINUM SKIMMER REPAIR JOHNNY WEISSMULLER ALUMINUM SKIMMER THAT OXIDIZED FROM A FAULTY GASKET.

STAINLESS STEEL SKIMMER REPAIR PANEL FULL INSTALLATION OF A STAINLESS STEEL SKIMMER REPAIR PANEL

STAINLESS STEEL RETURN PANEL REPLACEMENT OF STAINLESS STEEL RETURN PANEL.

BEADED 15X30 FULL PRINT LINER THIS IS THE NEW 15X30 FULL PRINT BEADED SWIMMING POOL LINER FINISHED REPLACEMENT.

CALL OR EMAIL MARK'S POOL SERVICE LLC FOR ADDITIONAL DETAILS (484) 866-0561.